-
Technical Basis For Spray-Applied And Filament-Wound Pre-insulated Pipes (GB/T 34611-2017)Nov 16, 2026There are several production methods for prefabricated direct-buried insulated pipes, one of which is the "pipe-in-pipe" system. Another ...
-
Temperature Resistance And Operating Conditions For Polyurethane-Insulated PipesNov 14, 2026The temperature resistance of prefabricated, direct-buried polyurethane-insulated pipes is a critical parameter that must be clearly defined during...
-
Key Considerations For On-Site Storage Of Pre-Insulated PipesNov 12, 2026If insulated pipes are not stored properly after arriving at the construction site, issues such as the aging of the outer protective casing, moistu...
-
Airtightness Testing: The Definitive Check For Joint SealingNov 10, 2026The joints of insulated pipelines represent the weakest points in the entire network; therefore, an airtightness test is a critical procedure for v...
-
Carbon Black Content: A Key Indicator Of Aging Resistance in Outer Protective PipesNov 07, 2026High-density polyethylene (HDPE) outer protective pipes serve as the outermost layer of prefabricated direct-buried insulated pipes, providing wate...
-
What Are The Differences Between The Spray-winding Process And The Pipe-in-pipe Process?Nov 05, 2026There are two primary production methods for prefabricated direct-buried insulated pipes: the "pipe-in-pipe" process and the spray-windin...
-
Density, Closed-Cell Content, And Thermal Conductivity: Three Indispensable MetricsNov 03, 2026For polyurethane (PU) foam, density, closed-cell content, and thermal conductivity are the core indicators used to evaluate the quality of insulate...
-
Before Purchasing Pre-insulated Pipes, Understand GB/T 29047-2021Oct 29, 2026GB/T 29047-2021, titled "Prefabricated Directly Buried Insulated Pipes and Fittings-Rigid Polyurethane Foam Insulation with a High-Density Pol...
-
The Aging Sequence Of Insulation Pipe Foam Layers And Outer Protective CasingsOct 29, 2026To ensure the longevity of an insulated pipe, the key lies in determining which component ages first. The foam layer is sensitive to heat and degra...
-
Monitoring Methods For Thermal Displacement in Operating Insulated PipelinesOct 27, 2026Once a pipeline ruptures, it is no longer a matter of simple maintenance-it becomes a serious accident. Excessive thermal displacement never happen...
-
The Standard Basis For The Lap Length Of The Insulation Pipe Patch JointOct 23, 2026The lap length of the outer protective pipe at the insulation pipe patch is not arbitrarily fixed; the standard clearly stipulates it. This length ...
-
Design Differences Between Trench Laying And Direct-buried InstallationOct 21, 2026There are two main methods for laying insulation pipelines: direct burial and trenches. The difference in design between the two is not just about ...













