Polyurethane insulation pipe heating pipe network leakage solution
Due to aging and other reasons, the heating network will inevitably appear leakage problems after many years of use, and even serious accidents. Instead of spending huge efforts to repair every year, it is better to develop the old pipe network renovation plan of polyurethane insulation pipe, which can save energy to a large extent while solving the leakage problem.
(1) Subsection suppression method
Through the static pressure test of heating pipe network to find and deal with the leakage of pipe network I method. It focuses on a method to comprehensively regulate the leakage of directly buried heating pipe network after furnace shutdown; It is especially suitable for the directly buried polyurethane insulation pipe heating network with poor construction quality, long service life and leakage. The main points are :(1) when the circuit or pipe section is pressed, the blind plate must be added at the boundary (valve #), and the valve in the middle should be fully opened; (2) pressure - generally 0.6~ 0.8MPa, pressure retention time is not less than two hours; (3) The pressure gauge connected with the pressure pipe network shows that the pressure drops to zero within two hours, so that there is no leakage in the pipe network can be determined. Otherwise, the pressure pipeline should be shortened and continued to be suppressed, so that the leakage pipe section can be determined repeatedly.
(2) On-line leak detection and positioning system
The system can accurately detect the leakage of heating pipeline and locate the leakage point. It generally includes 6 parts, including the first piezoelectric sensor, the first flow sensor, the end piezoelectric sensor, the end flow sensor, DSP microprocessor and the display.
(3) heating pipe network monitoring system
Through intelligent tester and communication equipment, can provide timely pipeline leakage and location information.

