Electric Heat Melting Sleeve

This Electric Heat Melting Sleeve is a pipe fitting used to heat pipes and prevent them from freezing. It consists of high-density polyethylene sleeve, electric heating wire, PTC heating medium and insulating material. It is made of high-quality PE plate by secondary processing and composite special electric heating net, which can be widely used for heating, anti-freezing and heat preservation of transportation pipelines in petroleum, chemical industry, gas and water treatment industries.

When in use, the bushing is heated by the electric heating wire, which can effectively keep the temperature of the pipeline, avoid the problems of material freezing or pipeline blockage caused by low temperature of the pipeline, and ensure the normal operation of the transportation pipeline. In addition, it can ensure the thermal insulation effect of the pipeline, minimize the energy required in the transportation process, and reduce the production cost and improve the transportation efficiency by reducing energy consumption.

Features

1. Stable structure: This Electric Heat Melting Sleeve is made of steel, which has excellent insulation and flame retardant properties, while keeping the structure stable and not easy to deform. Even in extreme high temperature environment, it can ensure safety and high performance, and withstand high-precision high temperature.

2. Automatic production: it is made on an automatic production line by hot pressing and embedding alloy wires, and the electric heating sleeve is powered by a special hot melting machine, so that automatic welding and easy installation can be realized in large or small construction areas.

3. High connection strength: One of its outstanding features is its excellent adhesive strength, which is due to its steel composition. Once installed, it firmly grasps the surface of the substrate to which it is attached to ensure a firm and stable connection. In addition, EHMS has excellent sealing performance to ensure that no dust, moisture or other pollutants penetrate into the surface of the material.

4. Simple use: Because of its automatic electric welding system, the bushing also has a simple and safe installation process, allowing heating to a certain temperature before connection. Compared with other connection methods, the result of this process is a more robust and secure connection.

1. Remove soil, moisture, and other debris adhering to the surface of the pipe.

2. Wrap the electric heating tape tightly around the connection part of the pipe with a woolen buckle, and place the end with a wiring terminal on the lower layer of the overlap. Determine that the joint of the pipe is located in the middle of the electric heating melt strip.

3. Wrap the stainless steel buckle on the electric heating tape with a U-shaped clamp, insert the PE adhesive rod into the joint where the electric heating tape overlaps, tighten the stainless steel buckle and make the electric heating tape tightly adhere to the pipe wall.

4. Connect the power supply of the electric fusion welding machine to the electric fusion belt, set the heating time, and then start the electric fusion welding machine. Carefully adjust the heating current. There is a significant difference in the current settings between the 380V and 220V electric fusion welding machines.

Hot Tags: electric heat melting sleeve, China electric heat melting sleeve manufacturers, suppliers, factory, Insulation Joint Materials, PUR Half Shell