Our company's insulated bends include 45 ° pre insulated bend and 90 ° pre insulated bend.
It has carrier pipe(steel pipe, plastic pipe), insulation layer (polyurethane) and casing pipe(HDPE pipe, galvanized iron sheet).
We can produce national standards, American standards, German standards, Japanese standards, non-standard standards according to customer requirements.
There are various specifications for 45 ° pre insulated bends, and different specifications can be selected according to different purposes and requirements. The following are some common insulation elbow specifications:
1. DN20-DN1200: This is a common specification range for insulated elbows, where DN represents the nominal diameter, and corresponding insulated elbow specifications can be selected based on different pipeline diameters.
2.90 degrees and 45 degrees: These are common angle specifications for insulated elbows, representing 90 ° pre insulated bend and 45 ° pre insulated bend, respectively.
3. R=1.5D and R=1D: These are the bending radius specifications for insulated elbows, where R represents the bending radius and D represents the pipe diameter. According to different bending radius requirements, corresponding insulation elbow specifications can be selected.
4. Wall thickness and pipe thickness: This is an important specification parameter for insulated elbows, representing the wall thickness of insulated elbows and pipeline wall thickness. According to different engineering requirements and actual situations, different wall thickness and pipe thickness specifications can be selected.
In addition to the above specifications, there are other specifications for insulated elbows, such as insulation layer thickness, outer protective layer thickness, etc. These parameters also need to be selected according to specific engineering requirements. When selecting and using insulated elbows, it is necessary to pay attention to whether their quality and performance meet design requirements and relevant standards to ensure the safety and service life of the pipeline.
Advantages of Xingbang:
1.Transportation: Xingbang company located in Yutian county, hebei province, China, which in the center of Beijing, Tianjin, and Tangshan. Transportation is very convenient.
2.Quotation: We are the source manufacturer, with quality as the foundation, and there are no intermediaries to earn price differences, resulting in more favorable prices.
3.Profession: We have been deeply involved in the insulation pipe industry for 28 years, continuously researching and innovating. We have participated in the development of multiple national standards for insulation pipes.
4.Quality: All products implement a "three inspection system", which includes raw material inspection, finished product inspection, and factory inspection.
5.Customized: We can meet all the specifications you want.
Hot Tags: 45° pre insulated bend, China 45° pre insulated bend manufacturers, suppliers, factory, Polyurethane Thermal Insulation Elbows